It has PCB backplane with power IC- SD card socket It need 4 IO port at least to drive The module port is compatible with 1602 LCD and Nokia 5110 / 3310 LCD display port File: Normally- the chip is Samsung S6D02A1.
Important Note: Using with Arduino- every IO port should be connected with resistance range 500 ~ 2KΩ.
- Display size: 1.8inch
- Dot matrix: 128 x 160
- Input voltage: 5V / 3.3V
- Driver IC: HX8353 / S6D02A1 / ST7735 Pin definition: 1-RST- 2-CE- 3-D/C- 4-DIN- 5-CLK- 6-UCC- 7-BL- 8-GND
- Size: 54 x 34mm(L x W)
- Package included: 1 x 1.8inch SPI TFT LCD display module